On the enamel reactor airtightness testing

Shandong Tanglian always adhere to the "quality-oriented", with high-quality product quality and perfect after-sales service to win the trust of customers and a high degree of praise, the product sells well at home and abroad.

Glass lined reactor sealing experiment can effectively test the sealing of the equipment, so that the equipment is in a good state of operation, the following take you to understand how to carry out the glass lined reactor sealing experiment.

First of all, heating, pressurization sealing experiment, the experimental medium can be air, nitrogen, but better is to use inert gas, prohibit the use of oxygen or other gases.

Second, heating and pressurizing, it is necessary to proceed slowly. Temperature rise rate is not greater than 80 degrees / hour. Test pressure, with even receive the glass-lined reactor inlet valve and compressor (or high-pressure pump) connected. It is necessary to carry out the pressurization in stages, take the working pressure as the distance, stay for 5 minutes for each rise and stay for 30 minutes when rising to the experimental pressure to check the sealing condition. The experimental pressure is 100-105% of the working pressure.

In addition, in the process of glass lined reactor experiment if found leakage, should first reduce the pressure, and then properly tighten the nuts and joints, prohibit tightening the nuts and joints under high pressure.

Need to know more about the content of the reactor, please continue to pay attention to us.